A lot of time is used for thinking out al the hardware to buy. I am going to use the old bolts when I am preassembly the fuselage, and replace the bolts to new ones when I am finished. Some old AN4- bolts is damaged and needs to be replaced with stronger AN4- bolts. One example is the bolt holding together the rear belly tube, lower boom tube and rear wing strut tubes. All the control cables is being replaced also. It has regular stainless steel wire for rudder&tailwheel control. Dual Teleflex steering cables is used for elevator and ailerons. And the list goes on…
Jag är ett sätt att tänka.
Anders Aircraft & Automation 